Products

SL-30

	Engineered triangular headstock with wide base lowers machine center of gravity and creates increased rigidity.
	The precise heavy-duty turret with a quick indexing mechanism offers ideal cutting performance.
	The SL-20 and 30 include a standard hydraulic tailstock that allows manual pressure adjustment and programmable quill extend / retract.
	The high quality fine grained cast iron base incorporates a 45 slant bed design and guarantees the overall machine stability, vibration dampening and long term accuracy.
	The large chip area, combined with the slant bed design and fully enclosed splashguards, optimizes coolant circulation, chip disposal and overall safety.

SPECIFICATIONS Unit:mm(Inch)

ITEM	SPECIFICATION			SL-30
WORK CAPACITY	Swing over bad			Ø575 (Ø22.6)
	Swing over side			Ø354 (Ø13.9)
	Max. machining diameter			Ø350 (Ø13.8)
	Max. machining length			720 (28.3)
MACHINE BODY	Slant angle of bed			45˚
	Max. travel range	X-axis		X-axis (Cross)		Z-axis (Longitudinal)
		Z-axis		246 (9.69)		770 (30.3)
	Servo motor			1 KW		1 KW
	Rapid traverse rate each axis			X-axis 20m/min		Z-axis 20m/min
SPINDLE	Diameter of spindle front bearing bore			Ø130 (Ø5.1)
	Diameter of spindle bore/Draw bar bore			Ø86/Ø75 (Ø3.4/Ø2.95)
	Spindle nose type			ASA A2-8
	Taper of spindle bore
	Spindle drive motor			15/18.5KW(20/25HP)(STD)	18.5/22KW(25/29HP)(OPT)
	Spindle speed			10” chuck 3000 rpm (STD)	12” chuck 2500 rpm (OPT)
	Diameter of chuck		Standard	10” (STD) (Tonfou)	12” (OPT) (Tonfou)
			Optional	10” (OPT) (KITAGAWA)	12” (OPT) (KITAGAWA)
HYDRAULIC TAILSTOCK	Quill diameter			Ø65 (Ø2.56)
	Tailstock travel			644.5 (25.42)
	Quill type			Live
	Quill taper			MT NO.4
	Quill stroke			50 (1.97)
TOOLS TURRET	Type			Vertical
	No. of tool capacity			8 pcs (STD)/ 10 pcs (OPT)
	Tool shank post			25 × 25 (1 × 1)
	Boring diameter post			Ø40/4 pcs (Ø1/ 4 pcs)
DRIVE MOTOR	Coolant motor			215 W (HP)
	Hydraulic motor			2.24 KW (3 HP)
	Chip conveyor motor			215 W (HP)
MISCELLANEOUS	Power requirement			208-220V/ 100 Amps / 3 Phase
	Height from floor to spindle			977 (38.5)
	Floor area (L × W × H)			3489 × 2379 × 1823 (137.3 × 93.7× 71.8)
	Net weight Approx.			3100 kgs (6820 Ibs)
	Gross weight Approx.			3800 kgs (8360 Ibs)

　　․Specifications are subject to change without notice

S-series

M-series

BM-series

WORK CAPACITY