CL560/480

• High Rigidity Spindle
• Anti-Wear Slideway
• Low Noise, Rigged, Headstock
• Stiff Carriage
• Two Step Feed Tailstock
• Circular Brakes
• Robust Bed
• Optional Metri/Inch Gear Box

CL400

• Yang Engine Lathes
• High Rigidity Spindle
• Anti-Wear Slideway
• Low Noise, Rigged, Headstock
• Stiff Carriage
• Two Step Feed Tailstock
• Circular Brakes
• Robust Bed
• Optional Metri/Inch Gear Box

FBL-710

FBL-810

FBL-975

• One Piece constructed Flat Bed
• 3 point support rigid Spindle
• C Axis available
• Max Swing over carriage- 700mm, over bed 1140mm
• Max cutting length - 1000-8000mm
• H4 or V8 Hydraulic Turret available

CL-43120

CL-43157

• Hardened and Ground Gear in Headstock
• Hardened and Ground Bed Ways
• High Rigidity Spindle
• Massive Heavy Duty Headstock
• Rigid One Piece Bed and Base
• One Shot Lube System For Apron and Slide way
• Automatic Feed/Rapid Feed
• Inch/Metric Gear Box

CL-37137

• Hardened and Ground Gear in Headstock
• Hardened and Ground Bed Ways
• High Rigidity Spindle
• Massive Heavy Duty Headstock
• Rigid One Piece Bed and Base
• One Shot Lube System For Apron and Slide way
• Automatic Feed/Rapid Feed
• Inch/Metric Gear Box

Used-CK1

Yang CK1 - Please call us for more information

Used-SML30

1998 Yang SML-30 -- Standard Features

Fanuc 0TD Control

Spinlde Speed 3,000rpm

Fanuc Spindle Motor 20/25HP

8 Stations Turret

Manual Tailstock and Programmble Quill

High Rigidity Casting

Optimization of Spindle and Housing Structure

High Rapid Traversa Rate 1181ipm

Used-SMV1000

Yang SMV1000- Very Good Condition -

Fanuc 0MD

Working Area 40"x20"

Spindle Speed 6,000 rpm 

Fanuc Spindle Motor 15HP

20 Tools Armless ATC

SL-12

SL-20

SL-200

• Headstock triangular design with wide base
• Quick hydraulic tool turret with a quick indexing mechanism (optional on SL-12)
• Linear guideways provide high-speed rapid traverse rates.
• 45° slant bed design.
• Optimum chip outlet

ML-280

ML-300

ML-350

ML-60A

• High capacity cartridge spindle with four bearings.
• Premium heavy-duty linear guideways provides traverse rates of 1181 ipm.
• Quick hydraulic tool turret with tool-to-tool change time of 0.3 seconds.
• Ballscrews are anchored at both ends and ball nuts are pre-tensioned

DMC880-5XT

DMC-1730

• X / Y / Z axes: 3000 / 1700 / 900mm
• Distance between columns: 1800mm
• Spindle Speeds:
• Belt Type:8000-10000 rpm
• Direct Drive: 10000-20000 rpm
• Build-in : 18000-30000 rpm
• Cutting feed: 1~10000mm/min
• Dimensions: 3200×1700mm
• Working area: 3000×1660mm
• T-Slot(W×No.×CD): 22×9×200mm
• Max. Table load: 6200/13640 kgs/lbs

MH-500

• Extended spindle nose minimizes interference between headstock and workpiece while allowing a wide range of machining applications.
• Moving column and optimum structural rigidity result in superior accuracy and reliability.
• X, Y, and Z axes contain highly accurate, rugged linear guideways to assure rapid axis traverse while maintaining precision and accuracy.
• Single piece cast base and saddle promote durability and accuracy.
• Single piece cast base and saddle promote durability, accuracy, reduce backlash and guarantee accurate positioning and feeding.
• High pressure coolant system facilitates deep drilling and milling applications.
• Optional 4th axis available.
• Large capacity tool magazine accompanied with rapid tool change and random access selection, save time and offer higher productivity.
• Fully enclosed splash guard, double-sided slant linear guide covers and large volume coolant enable double screw chips augars to remove chips.
• Cooling system to extend tool life; telescopic covers and waterfall coolant designed to keep chips from remaining on the table or the augers.
• Splash guard device includes fully enclosed splash guard, chain type, screw type chip conveyors and chip cart.

MH-630

• Extended spindle nose minimizes interference between headstock and workpiece while allowing a wide range of machining applications.
• Moving column and optimum structural rigidity result in superior accuracy and reliability.
• X, Y, and Z axes contain highly accurate, rugged linear guideways to assure rapid axis traverse while maintaining precision and accuracy.
• Single piece cast base and saddle promote durability and accuracy.
• Single piece cast base and saddle promote durability, accuracy, reduce backlash and guarantee accurate positioning and Feeding.
• High pressure coolant system facilitates deep drilling and milling applications.
• Optional 4th axis available.
• Large capacity tool magazine accompanied with rapid tool change and random access selection, save time and offer higher productivity.
• Fully enclosed splash guard, double-sided slant linear guide covers and large volume coolant enable double screw chips augars to remove chips.
• Cooling system to extend tool life; telescopic covers and waterfall coolant designed to keep chips from remaining on the table or the augers.
• Splash guard device includes fully enclosed splash guard, chain type, screw type chip conveyors and chip cart.

MH-800

• Extended spindle nose minimizes interference between headstock and workpiece while allowing a wide range of machining applications.
• Moving column and optimum structural rigidity result in superior accuracy and reliability.
• X, Y, and Z axes contain highly accurate, rugged linear guideways to assure rapid axis traverse while maintaining precision and accuracy.
• Single piece cast base and saddle promote durability and accuracy.
• Single piece cast base and saddle promote durability, accuracy, reduce backlash and guarantee accurate positioning and feeding.
• High pressure coolant system facilitates deep drilling and milling applications.
• Optional 4th axis available.
• Large capacity tool magazine accompanied with rapid tool change and random access selection, save time and offer higher productivity.
• Fully enclosed splash guard, double-sided slant linear guide covers and large volume coolant enable double screw chips augars to remove chips.
• Cooling system to extend tool life; telescopic covers and waterfall coolant designed to keep chips from remaining on the table or the augers.
• Splash guard device includes fully enclosed splash guard, chain type, screw type chip conveyors and chip cart.